Product Information

#6 Needle Spray Gun FU-3-6

Posted by EMICorporation on

#6 Needle Spray Gun   FU-3-6

New type of spray gun that combines a constant volume discharge valve mechanism. → Check this product page

Read more →

#5 Basic Knowledge of Grinding Wheel Part.2

Posted by EMICorporation on

#5 Basic Knowledge of Grinding Wheel Part.2

Ⅱ. Manufacturing Process of Grinding Wheels Three Factors of Grinding Wheels There are many different kind of manufacturing methods depending on bonds. Our products are produced with resinoid bonds which is safe and used in many industries. Bond Type Code Major Components Firing Method / Temperature Applications Features Vitrified V Feldspar / Soluble Clay Continuous kiln / Bell kiln / Downdraft kiln 1200-1350°C (2192-2462°F) Machining, Free-hand grinding, Super finishing, Honing, Pulpstone Use feldspar and/or soluble clay as binder and bake at high temperature of 1300 degrees C after complete drying. The most common manufacturing method. Easy to adjust grade and...

Read more →

#4 Tubing Dispenser TOM.200 | Tomita Engineering (TOMIX)

Posted by EMICorporation on

#4 Tubing Dispenser TOM.200 | Tomita Engineering (TOMIX)

TUBING DISPENSER TOM.200 Product page TOM.200 tube type dispenser which is hard to be material-hardened after discharge and dripping by original rotor mechanism and vacuum mechanism. Especially, this is suitable for anaerobic adhesive such as cyanoacrylate adhesive. Both of PTFE tube and silicon tube can be used, so it is good for fixed quantity discharge and supply of any type of fluid.Power: AC100~240V(usable abroad) Easy and flexible to use Suck up the liquid only with electrical power Easy to use with a pen-type nozzel Flexible work for line drawing and dot application Rotating speed can be changed for preferred flow...

Read more →

#3 Basic Knowledge of Grinding Wheel Part.1

Posted by EMICorporation on

#3 Basic Knowledge of Grinding Wheel Part.1

Ⅰ. Why grinding wheel is able to grind?   Three Factors of Grinding Wheels These three factors enable grinding wheels to grind, polish and cut. Abrasives Each abrasive becomes edge and able to grind workpiece. Abrasives are fallen off when these are worn down and lost sharpness,then these expose new cutting edges constantly (Self sharpening). Binder, Bond Bond combines and holds the abrasives together. The quality of wheels is controlled by the type and/or compounded amount of bond. Pore Pore is a space of between abrasives. Shavings fall in the pores and are dischargedwhile the rotations of wheel. Grinding wheel...

Read more →

#1 Air Shears [Muromoto Tekko]

Posted by EMICorporation on

#1 Air Shears [Muromoto Tekko]

Muromoto Air Shears Video Content 1. Air Cutters(Hand-Held type and Machine-Fitting type) 2. Cutting of various sample. Click here more information.

Read more →